Project-Based MOQ · Sample Planning · Export Coordination [email protected]   +86 18135720426
WUHAN SUNFULL Packaging Business Division logo BeautyContainersWUHAN SUNFULL · PACKAGING

Perfume Bottles · Product selection

Perfume Bottles for Fragrance Packaging

Compare fragrance bottles as complete bottle, sprayer, collar and cap systems.

  • Neck route first
  • Spray behavior is measurable
  • Presentation needs physical limits
Browse All 14 Products

Products

Perfume Bottles

Choose a model to view capacity, material and component details. Ask about any specification not listed.

14 products

Fragrance dispensing and presentation

Specify the Perfume Bottle and Atomizer as One Pack

Choose a perfume bottle only after the fill volume, neck route, sprayer, collar, cap, fragrance contact and finish are defined together. The bottle silhouette alone is not a supplier-ready specification.

Formats

Choose a Format

Crimp-neck fragrance bottles

Coordinate the recorded neck with sprayer, crimping route, collar and cap.

Screw-neck perfume packs

Review thread, gasket, dip tube, cap fit and the assembled appearance.

Travel and sample formats

Prioritize dose, leakage, evaporation and pack protection at small fill volumes.

Comparable RFQ fields

Compare Specifications

Use the same requirements when comparing products and supplier quotes.

ParameterWhat to compareWhy it matters
Neck finishRecorded crimp or screw interface and dimensionsIt determines the compatible sprayer and assembly route.
Sprayer systemActuator, pump engine, gasket, dip tube and outputFragrance delivery and leakage depend on the complete system.
Cap and collarFit, retention, alignment, material and finishDecorative parts affect both appearance and handling.
Fragrance contactBottle, gasket, pump and tube materialsThe formula contacts more than the glass body.
Pack-outDivider, cap protection and presentation cartonDecorated parts and glass surfaces can be damaged after approval.

Bill of materials

Define Perfume Bottles as an Assembled System

Keep the product code and every contact, dispensing, decoration and packing component inside one controlled BOM.

  1. 01Fragrance bottle and neck
  2. 02Atomizer pump and actuator
  3. 03Gasket and cut dip tube
  4. 04Collar and cap
  5. 05Decoration, label or artwork
  6. 06Divider and secondary packing

Product detail gallery

View Product Details

Open a product to browse its image gallery and specifications. Decoration and component combinations should be checked against your sample.

60ml Plastic Spray Bottle – GB-HSP-005GB-HSP-005View product details Perfume Bottle – GB-PB-001GB-PB-001View product details Perfume Bottle – GB-PB-005GB-PB-005View product details 50ml Glass Spray Bottle – GB-PB-007GB-PB-007View product details

Formula and use questions

Match the Pack to the Intended Application

These questions guide the shortlist; filled-pack validation remains project-specific.

Alcohol-based fragrance

Which gasket, pump and decoration contacts need formula review?

Oil-based perfume

Is the selected applicator and output suitable for the formula behavior?

Body or hair mist

What dose and spray pattern fit broader application coverage?

Controlled customization

Build the Visual System Around the Approved Neck and Components

Color, coating, printing, collar and cap finish should follow the confirmed bottle and atomizer route.

  • Bottle coating or frosting
  • Printing, labels or stamping
  • Collar finish
  • Cap material, color and surface

Validation before production

Plan Validation Around the Filled, Assembled Pack

Select checks from the formula, dispensing, appearance, handling and transport risks of the actual project.

Priming and output

Measure the assembled sprayer under defined conditions.

Leakage and evaporation

Review storage orientation, closure seal and representative temperature exposure.

Formula-contact change

Observe gasket, tube, pump and decoration behavior with the fragrance.

Cap and decoration durability

Check repeated handling and packing contact on production-intent parts.

Sample and order path

Samples, Quotes and Ordering

Choose a product, review its sample and agree the quotation scope.

01

Select neck and fill volume

Share the target format and filling or crimping constraints.

02

Match atomizer components

Request bottle, pump, tube, collar and cap as one sample BOM.

03

Approve appearance

Review decorated glass and matching components under agreed references.

04

Plan filled-pack review

Define spray, leakage, formula-contact and packing checks before production approval.

Packaging business division support

Keep Fragrance Components Synchronized

BeautyContainers can coordinate product-code clarification, component matching questions, sample requests and quotation comparison for a fragrance pack.

  • Bottle and neck specification
  • Matched atomizer BOM
  • Decoration approval reference
  • Assembly and packing requirements

Buyer resources

Technical Resources

Open the resource that matches the unresolved material, component, testing or approval decision.

Perfume Bottle Neck Finish Guide

Choose a neck and atomizer route before comparing finishes.

Open resource

Decoration Guide

Plan physical appearance approvals across glass, collar and cap.

Open resource

Packaging Test Checklist

Turn spray, leakage and transport concerns into a test brief.

Open resource

Procurement answers

Guides for Perfume Bottles

Resolve the highest-risk buying questions before comparing samples and quotations.

Perfume Bottles Buying Questions

Should I choose a perfume bottle before the sprayer?

Shortlist the bottle and neck together with the intended assembly route. The sprayer, gasket, dip tube, collar and cap must then be matched to that exact interface.

What is the practical difference between crimp and screw necks?

They use different assembly and component routes. The right choice depends on the bottle record, filling setup, desired appearance, service needs and the matched components available for the project.

Can a cap from one perfume bottle be used on another?

Only after fit, retention, alignment and clearance are confirmed on the assembled sample. Similar outside dimensions do not prove compatibility.

How should fragrance leakage be assessed?

Use the intended formula and complete pack, then define orientations, duration, temperature and acceptance criteria appropriate to storage and transport.

What should a custom perfume bottle quotation include?

Include product code, fill volume, neck route, pump output, collar, cap, decoration, quantity, packing, destination and the required sample and approval stages.

Collection buyer guide

From Fragrance Brief to Matched Atomizer Pack

A comparable perfume bottle quotation begins with the functional assembly, not the decoration mood board.

Define spray and fill

State fragrance type, target dose, fill volume and user experience before choosing components.

Lock the neck system

Record the bottle neck, atomizer, gasket, tube, collar and cap in one BOM.

Approve appearance after fit

Decorate the selected, assembled pack and retain physical references for repeat comparison.

Continue by decision

Related Products and Guides

Choose the next page by application or the unresolved product decision that matters to your project.

Start a project

Build a Comparable Perfume Bottle RFQ

Component availability, process minimums, sample timing and production timing are confirmed after the BOM is reviewed.

WhatsApp Us

We use these details only to review your request. We will identify missing specifications and the practical sample, MOQ and quotation path; do not send a confidential formula in this first message.

WhatsAppDiscuss your project